Hello dear amigurumi lovers, we share many amigurumi recipes with you in detail. The recipe we will share today will be Christmas Kids.
It is really nice to knit amigurumi animal recipes. Christmas Kids is a model that you will enjoy knitting. Make sure your kids will have a good time when this pattern is finished. There may be different Christmas Kids recipes, but I can say this is the sweetest.
Amigurumi cute Christmas Kids also helps you instill a love of Christmas in your kids.
Don’t forget to check out our other free recipes.
New Year’s Dolls
For work you will need:
1. Cotton 2 colors (I used Pekhorka
“Children’s cotton” Thread length in a skein: 330m
Skein weight: 100g).
For the body and hats in the New Year
variant-green or red (for 1
baby doll goes in about 1/3 of a skein).
In order not to ripple in the eyes in
master class, I used the color “mint”.
For the head and handles – the color is severe (about
1/5 skein).
2. İncyazha for a scarf (you can use
any remainder incyazhi).
3. Beads for the eyes 2pcs black, diameter –
0.6 or 0.8 mm.
Christmas Kids
4. Holofiber or synthetic winterizer for stuffing. (About 80 g, it depends on how tight
you want to stuff a toy).
5. Needle long 9 cm.
6. A piece of inco-wire 20 cm.
7. Adhesive plaster in a skein (you need a piece about 10 cm long).
8. Cotton swabs 5pcs or dupel 12 * 60 nylon. (Photo will be below).
9. Hook No. 1.25.
10. Needles number 2.
11. Marker for knitting and pins.
12. Dry pastel or pink pencil.
13. Buttons 2 pcs.
Legend:
SC – single crochet.
Double crochet DC.
İncib.- incibavka
Decav.-decavka
Amigurumi ring:
Step 1: Make a loop about 2.5 cm from the end of the thread.
Place the working thread between your index and middle fingers.
Step 2: Insert the hook into the loop, grab the working thread and pull it out in front of
loop.
Step 3: Grab the working thread and drag it through the loop.
Step 4: Pull out the working thread and tighten. This loop does not count as the first
column in a ring.
Step 5: Bring the hook from below under both threads, forming a large loop.
Grab a working thread.
Step 6: Pull out the loop and hook the working thread again. İnco drag
yarn through two loops on the hook. Thus, we
tied the first single crochet in the amigurumi ring.
We will knit tightly, in a spiral for 2 loops !!!
Legs (Mint color):
1) in the amigurumi ring 5 SC;
2) 1 SC, 4 inc. (in each loop) = 9 SC;
3)-15) knit on 9 stitches SC (14 rows).
Knit 2 legs. We cut off the thread on the inc’s leg, leaving a long tail.
On the second we do not cut off, inc we continue to knit the body.
Body (Color mint):
1) We connect the two legs together, making incs on
sides for this:
knit on the left leg 5 SC hang a marker;
then a chain of 10 air loops;
then along the inc foot 3 SC, inc., 1 SC, inc., 3 SC;
10 air loops;
on the left leg 3 SC, inc., 1 SC, inc., 3 SC.
There should be 42 SC in total.
2) 42 SC stitches of air chain inco knit for 1 loop! On legs for 2
loops;
3)-14) we knit 12 rows (for 2 loops) without changes = 42 SC.
We sew the hole between the legs with the rest of the thread from your inc leg for 1
loop. We stuff the legs tightly with holofiber. (I use for this
barbecue stick).
15) (5 SC, dec.) 6 times = 36 SC;
16) 36SC;
17) 36SC;
18) (4 SC, dec.) 6 times = 30 SC;
19) 30 SC;
20) 30 SC;
21) (3 SC, dec.) 6 times = 24 SC;
22) 24SC;
23) 24 SC.
We stuff the body tightly with holofiber up to half.
24) (2 SC, dec.) 6 times = 18 SC;
25) 18SC;
26) 18 SC.
Head:
Change the thread color. Skin color (severe).
27) (2 SC, inc.) 6 times = 24 SC;
28) (3 SC, inc.) 6 times = 30 SC;
29) (4 SC, inc.) 6 times = 36 SC;
30) (5 SC, inc.) 6 times = 42 SC;
31) (6 SC, inc.) 6 times = 48 SC;
32) (7 SC, inc.) 6 times = 54 SC;
33) (8 SC, inc.) 6 times = 60 SC;
34) (9 SC, inc.) 6 times = 66 SC.
Stuff the body. Insert 5 cotton swabs into the neck (fasten with adhesive tape) or
dowel.
If you decide to insert a dowel, then through the crevice in it you need to incubate
incowire for hands.
To do this, we introduce the inco-wire from the side, between the 22nd and 23rd rows of the body, then into
a crevice, then we bring it out from the other side.
35) – 46) 66 SC (12 rows);
47) (9 SC, dec.) 6 times = 60 SC;
48) (8 SC, dec.) 6 times = 54SC;
49) (7 SC, dec.) 6 times = 48 SC;
50) (6 SC, dec.) 6 times = 42 SC;
51) (5 SC, dec.) 6 times = 36 SC;
52) (4 SC, dec.) 6 times = 30 SC.
Fill your head in half.
53) (3 SC, dec.) 6 times = 24 SC;
54) (2 SC, dec.) 6 times = 18 SC;
55) (1 SC, dec.) 6 times = 12 SC.
Stuff the rest of the head.
We break the thread, leaving a long tail. (we will make a tightening for the eyes)
Pull the hole.
Drawstring:
Decide which side the face will be on (no difference) mark the place
location
eyes (you can pins) I have it between 12 and 13 next to the head. Between
eyes should be 7-8 loops (as you like)
Twist the rest of the thread into a long needle and stick it in the center of the crown – bring it out
between the rows at the inc supposed location of the left eye, then
we insert the needle into the next loop, of the same row and bring it out into place
location of the inca eye, then to the left, and so on several times, pulling
“eye sockets” between each other, then bring to the top of the head and fix
knot.
İncish with black thread bead-eyes. (in places of tightening on the head):
Pens:
Skin color (severe).
1) in the amigurumi ring 4 SC;
2) inc increments in each loop = 8 SC;
3) 8SC;
4) 3 DC with one top, 7 SC = 8 SC – for one hand;
(7 SC, 3 DC with one top = 8 SC – for the other hand);
5) 8SC.
Change color to mint.
6)-24 8 SC (19 rows);
We break the thread, leaving a long tail (we will incise with it). Finished
put inc handles to incovoloke, zag pull the last loop at the right level,
fixed with adhesive tape. Put the handles on the inco-wire, inc pull to
torso and gently incish.
For whom it causes difficulty, or not, inc.
pull the loops of the arm at the top and incish to the body.
Beanie (Mint color):
1) in the amigurumi ring 6 SC;
2) 6 inc. = 12 sc;
3) (1 SC, inc.) 6 times = 18 SC;
4) (2 SC, inc.) 6 times = 24 SC;
5) (3 SC, inc.) 6 times = 30 SC;
6) (4 SC, inc.) 6 times = 36 SC;
7) (5 SC, inc.) 6 times = 42 SC;
8) (6 SC, inc.) 6 times = 48 SC;
9) (7 SC, inc.) 6 times = 54 SC;
10) (8 SC, inc.) 6 times = 60 SC;
11) (9 SC, inc.) 6 times = 66 SC;
11) -23) 66 SC (13 rows).
We break the thread, leaving a long tail (we will incise with it).
Cones (Mint color):
Tie two identical bumps and inc stitch along
sides (Christmas colors).
1) in the amigurumi ring 6 SC;
2) 6 inc. = 12 sc;
3) (1 SC, inc.) 6 times = 18 SC;
4) (2 SC, inc.) 6 times = 24 SC;
5) (3 SC, inc.) 6 times = 30 SC;
6) (4 SC, inc.) 6 times = 36 SC;
7)-10) 36 SC.
We break the thread, leaving a long tail (we will incise with it).
Scarf:
Color optional. We knit with knitting needles, involuntarily dialing (in
depending on incyazhi) number of loops. And the length that suits.
I knitted with needles No. 2 on 11 loops, 142 rows.
1p facial loops;
2 r purl.
Alternate to desired length.
If crocheting, then depending on the desired width, choose the number of air loops. Example, 6 ch, then 2 lifting loops, turn, 5
DC. Further turning rows, to the desired length.
Assembly and decoration:
1. Put on a hat on your head (should fit tightly), incish, inc
thread in several places.
2. Arrange the bumps on the hat as you like and stuff them
holofiber incish.
3. Cross stitch the navel.
4. Brown the cheeks with dry pastel or a stylus pounded into dust
pencil (use a brush or foam swab).
5. We sew buttons on the hat.
6. Tie a scarf.
New Year’s doll is ready! Knit with pleasure!
View other schemes