The size of the toy depends on the thickness you choose,
incs and knitting densities
Necessary materials:
1. Line: Children’s novelty “Pekhorka” (200m/50g), colors: white,
blue, black, yellow, red.
2. Hook number 1.5
3. Filler
4. Stitching needle
details
5. Copper incowire
diameter 2.0 and 1.0 mm
6. Adhesive plaster for
insulation incowires
7. False eyelashes (2
PC.)
8. Finished plastic
eyes (2 pcs.)
9. Superglue
10. Wooden bead,
black half decushins
Legend:
Ch – air loop
SL-ST – connecting post
Sc – single crochet
Hdc – half double crochet
İnc – inc bonus (inc knit 2
column in one loop)
Dec – decave (inco knit two
columns together)
P.cm – displacement loop
* – repeat the specified number
once
P / pp – knit only for
front half loop
Z / pp – knit only for
rear half loop
Tip: inci knitting
toys decave out
two loops
I recommend doing
“invisible” decave.
Legs (2 parts)
First we knit the boot with black thread.
I inco wrote the displacement loops, but, because knitting density for all
different, find out for yourself whether you need them or not and in what
quantity (1-2 p.cm), the inc marker goes exactly in the middle at the back.
1 row: 10 ch., from the second loop from from the hook inco knit 8 sc, 3 sc in
top, on the other side of the chain: 7 sc, inc (20)
2 row: inc, 7 sc, (inc) * 3, 7 sc, (inc) * 2 (26)
3 row: 1 sc, inc, 3 sc, (Hdc, inc Hdc)*7, 4 sc, inc, 1 sc, inc (36)
4 row: 2 sc, inc, 9 sc, (inc, 2 sc)*4, 8 sc, inc, 2 sc, sl-st (42)
Cut out an insole from cardboard (plastic) according to the shape of the resulting
details.
5 row: for s/pp 8 sc, 24 Hdc, 10 sc
(42)
6-8 row: (3 rows) 8 sc, 24 Hdc, 10
sc(42)
9 row: 8 sc, (2 Hdc, dec Hdc) * 6, 10
sc(36)
Insert insole.
10 row: 8 sc, 18 Hdc, 10 sc (36)
11 row: 8 sc, (dec, 1 sc) * 6, 10 sc
(30), 1 p.cm
12th row: 3 sc, dec, 4 sc, (dec)*6, 4 sc, dec, 3 sc (22)
13 row: 4 sc, (dec) * 6, 6 sc (16)
14 row: for p / pp (1 sc, inc) * 8 (24)
15 row: (3 sc, inc) * 6 (30)
16 row: 30 sc
17 row: (3 sc, dec) * 6 (24)
Finish sl-st, cut the thread, cinch.
Prepare two pieces of incowire with a diameter of 2.0 mm about 23 cm.
Twist the ring from one end of the incowire and wrap it around
adhesive tape so that our frame does not slip on the insole. Paste in
leg and tightly fill the boot with filler.
For better stability, tie the sole with a “crustacean step” behind
the remaining p / pp 5 rows.
Knit the second shoe like this:
1-4 row: knit in the same way as the first
5 row: for s/pp 10 sc, 24 Hdc, 8 sc (42)
6-8 row: (3 rows) 10 sc, 24 Hdc, 8 sc (42)
9 row: 10 sc, (2 Hdc, dec Hdc) * 6, 8 sc (36)
10 row: 10 sc, 18 Hdc, 8 sc (36)
11 row: 10 sc, (dec, 1sc) * 6, 8 sc (30), 1 p.cm
12-17 row: knit in the same way as the first
Finish sl-st, cut the thread, cinch.
Insert the frame, stuff tightly.
Now we will knit a sock. Same for both legs.
İnci connect the red thread to the beginning of the 14th row and knit for the remaining
salary:
1 row: 16 sc
2 row: (1 sc, inc) * 8 (24)
3-7 row: (5 rows) 24 sc
8 row: (2 sc, dec) * 6 (18)
9 row: (1 sc, dec) * 6 (12)
10-11 row: 12 sc
12 row: for p / pp (inc) * 12 (24)
13 row: 24 sc
Finish sl-st, cut the thread, cinch.
Stuff the detail.
İnc continue to knit the leg. Equally
for both legs. İnc and connect the yellow
thread to the beginning of the 12th row of the sock and knit
for the remaining s/pp.
1 row: 12 sc
2-6 row: (5 rows) 12 sc
Change the thread to white.
7 row: for p / pp (1 sc, inc) * 6 (18)
8 row: (2 sc, inc) * 6 (24)
9-11: (3 rows) 24 sc
Finish sl-st, leave the thread for
Inc.
Part of the leg tied with yellow
I didn’t stuff with thread, part,
tied with white thread, fill
before incising to the body.
Body
We start knitting with white thread. Marker incogoes strictly in the middle
back.
1 row: 2 ch., in the second loop
incoknit 6 sc (6)
2nd row: (inc)*6 (12)
3 row: (1 sc, inc) * 6 (18)
4 row: (2 sc, inc) * 6 (24)
5 row: (3 sc, inc) * 6 (30)
6 row: (4 sc, inc) * 6 (36)
7 row: (5 sc, inc) * 6 (42)
8 row: (6 sc, inc) * 6 (48)
9 row: (7 sc, inc) * 6 (54)
10 row: 54 sc
11 row: 8 sc, inc, 4 sc, 2 ch., 2 sc inc, 2 sc, inc, (8 sc, inc) * 2, 3
sc, 2 ch., 2 sc inc, 3 sc, inc, 8 sc, inc (60)
12 row: 60 sc
13 row: (9 sc, inc) * 6 (66)
14 row: 24 sc, (2 sc, inc) * 6, 24 sc
(72)
15 row: 72 sc
16 row: 24 sc, (3 sc, inc) * 6, 24 sc
(78), 1 p.cm
17-24 row: (8 rows) 78 sc, 2 sts
Change thread to blue
25 row: 78 sc
26 row: for s / pp 78 sc
Insert the incosheaths of the feet into the holes of the 2 ch. and twist them between
themselves into a single framework. Isolate the top of the frame
leyoko plaster. I incised my legs right away, you do as you like
more convenient, you can incide after it is completely
the whole body is bound and stuffed. Don’t forget to stuff the bases of your feet before
how to incise. The cockerel turns out to be slightly clubfoot, and
was intended. Due to the frame in the legs, he can easily incide
stable position, inc, and using the inco-wire indicated by me,
thickness.
27 row: (11 sc, dec) * 6 (72)
28-31 row: (4 rows) 72 sc
32 row: (7 sc, dec) * 3, 18 sc, (dec,
7sc)*3 (66)
33 row: 24 sc, (1 sc, dec) * 6, 24 sc
(60), 1 p.cm
34-35 row: 60 sc
36 row: (8 sc, dec) * 6 (54)
37 row: 54 sc, 1 p.cm
Gradually stuff tightly
detail
38 row: (7 sc, dec) * 6 (48)
39-41 row: (3 rows) 48 sc
42 row: (6 sc, dec) * 6 (42), 1 p.cm
43-45 row: (3 rows) 42 sc
46 row: (5 sc, dec) * 6 (36)
47 row: 36 sc, 1 p.cm
48 row: (4 sc, dec) * 6 (30)
Change thread to white
49 row: 30 sc, 1 p.cm
50 row: for s / pp (4 sc, inc) * 6 (36)
51 row: (2 sc, inc) * 12 (48)
52 row: (7 sc, inc) * 6 (54)
At this stage, let’s digress a bit from
knitting the head and knitting the collar, because.
after it will do much
more difficult.
gate
İnc fasten the white thread to the beginning of the 49th row
and knit for the remaining p / pp, carcass
keep your head close to you.
[(6 ch., from the 2nd loop from the hook we knit sl-st, 1 sc, 3 Hdc, 1 sc on the neck
inc, in the next we knit sl-st) * 2, 4 ch., from the 2nd loop from the hook
we knit 1 sl-st, 1 sc, 1 Hdc, 1 sc around the neck inc, we knit in the next
sl-st]*5.
Fasten the thread, cut.
İnco continue to knit the head
53 row: (8 sc, inc) * 6 (60)
54 row: (9 sc, inc) * 6 (66)
55-61 row: (7 rows) 66 sc
62 row: 20 sc, (dec, 1 sc) * 2, dec, 10
sc, (dec, 1 sc)*2, dec, 20 sc (60)
63 row: 60 sc
64 row: (8 sc, dec) * 6 (54)
65 row: 54 sc
66 row: (7 sc, dec) * 6 (48)
67-68 row: 48 sc
69 row: (6 sc, dec) * 6 (42)
70 row: 42 sc
71 row: (5 sc, dec) * 6 (36)
72 row: (4 sc, dec) * 6 (30)
73 row: (3 sc, dec) * 6 (24)
Stuff your head tightly
74 row: (2 sc, dec) * 6 (18)
75 row: (1 sc, dec) * 6 (12)
76 row: dec * 6
Close the hole, cut the thread, sew the tail.
We return to the 26th row of the body, inc we connect the blue thread to
the beginning of the row (we hold the carcass with our feet up) and for the remaining p / pp,
knit:
1 row: (12 sc, inc) * 6 (84)
2-4 row: (3 rows) 84 sc
Finish sl-st, cut the thread.
beard
Consists of two parts, we knit with a red thread.
1 row: 2 ch., in the second loop inco knit 6 sc (6)
2nd row: (inc)*6 (12)
3 row: (1 sc, inc) * 6 (18)
4-8 row: (5 rows) 18 sc
9 row: (1 sc, dec) * 6 (12)
10 row: 12 sc
11 row: (4 sc, dec) * 2 (10)
12 row: (3 sc, dec) * 2 (8)
Finish sl-st, cut the thread.
Similarly, we knit the second part, do not cut the thread, continue
knitting.
Compound:
1 row: 4 sc (in 2nd part), 8 sc (in 1st part), 4 sc (in 2nd part) (16)
2nd row: (dec)*8 (8)
3 row: fold the piece in half and inco-knit through both walls 4 sc,
finish, cut the thread.
Beak
Consists of two parts, knit with yellow thread.
1 part (upper):
1 row: 2 ch., in the second loop inco knit 6 sc (6)
2 row: (1 sc, inc) * 3 (9)
3rd row: 9 sc
4 row: (2 sc, inc) * 3 (12)
5 row: 12 sc
6 row: (3 sc, inc) * 3 (15)
7 row: (4 sc, inc) * 3 (18)
8 row: (5 sc, inc) * 3 (21)
9 row: (6 sc, inc) * 3 (24)
10 row: (7 sc, inc) * 3 (27)
11 row: (8 sc, inc) * 3 (30)
Finish sl-st, cut the thread.
2 part (lower):
1 row: 2 ch., in the second loop inco knit 6 sc (6)
2 row: (1 sc, inc) * 3 (9)
3 row: (2 sc, inc) * 3 (12)
4 row: (3 sc, inc) * 3 (15)
5 row: (4 sc, inc) * 3 (18)
6 row: 18 sc
7 row: 4 sc with a beard, 14
sc (18 sc)
Finish sl-st, cut the thread.
Connecting two parts into a beak:
İnc and connect the thread to the top, fold both parts facing each other
friend so that the beard is exactly in the middle of the beak, and
inco knit together 9 sc. Without breaking the thread, tie the beak in a circle sc.
Finish sl-st, cut the thread, leaving it for inc.
İncish the beak to the head, stuffing the upper part with filler, but not
strongly. Make a pull.
Pins incimerno showed the points where the needle is inserted. Incosto
make a crease with your fingers and fix it with one large
back and forth stitch twice. If you put a lot
filler, then the beak will stick out between the two parts,
therefore do not be zealous.
Crest
Consists of three parts, knit with red thread
1 part:
1 row: 2 ch., in the second loop inco knit 6 sc (6)
2nd row: (inc)*6 (12)
3 row: (1 sc, inc) * 6 (18)
4 row: (2 sc, inc) * 6 (24)
5-7 row: (3 rows) 24 sc
8 row: (2 sc, dec) * 6 (18)
9 row: 18 sc
Finish sl-st, cut the thread,
do not stuff the detail.
2 part:
1 row: 2 ch., in the second loop
incoknit 6 sc (6)
2nd row: (inc)*6 (12)
3 row: (1 sc, inc) * 6 (18)
4 row: (8 sc, inc) * 2 (20)
5-6 row: 20 sc
7 row: (8 sc, dec) * 2 (18)
Finish sl-st, cut the thread,
do not stuff the detail.
3 part:
1 row: 2 ch., in the second loop
incoknit 6 sc (6)
2nd row: (inc)*6 (12)
3 row: (1 sc, inc) * 6 (18)
4-5 row: 18 sc
Finish sl-st, do not cut the thread,
incocontinue knitting, the detail is not
fill.
Compound:
1 row: 9 sc (3rd part), 9 sc (2nd
parts), 18 sc (3rd parts), 9 sc (2-
part), 9 sc (1st part) (54)
2 row: 54 sc
Fold the piece in half and
inco knit 27 sc.
Incisew a comb to the head.
Hands (2 parts)
Thumbs (2 pieces), knit with white thread
1 row: 2 ch., in the second loop inco knit 6 sc (6)
2 row: (2 sc, inc) * 2 (8)
3-5 row: (3 rows) 8 sc
6 row: (2 sc, dec) * 2 (6)
Finish sl-st, cut the thread.
Fingers (3 pieces for each hand), knit with white thread
1 row: 2 ch., in the second loop inco knit 6 sc (6)
2 row: (2 sc, inc) * 2 (8)
3-6 row: (4 rows) 8 sc
7 row: (2 sc, dec) * 2 (6)
Finish sl-st, cut the thread, do not thread on every third finger
cut. Don’t stuff your fingers.
Compound:
1 row: 3 sc (on the 3rd finger), 3 sc (on the 2nd finger), 6 sc (on the 1st
finger), 3 sc (on the 2nd finger), 3 sc (on the 3rd finger) (18)
2 row: (2 sc, inc) * 6 (24), 1 p.cm
For the left hand:
3rd row: 9 sc, 3 sc fingers and 3 sc
palms simultaneously, 12 sc (24)
4 row: 9 sc, 3 sc on the remaining
finger loops, 12 sc (24)
For your hand:
3rd row: 3 sc fingers and 3 sc palms
simultaneously, 21 sc (24)
4 row: 3 sc on the remaining loops
fingers, 21 sc (24)
Further for both hands is the same:
5-8: (4 rows) 24 sc
Prepare 8 pieces of incowire
diameter 1.0 mm by 16 cm long
each (4 for each hand), with
one side isolate the ends
pieces of adhesive tape and
insert into fingers. twist
segments to each other. Track,
so that the inco marker follows strictly
palm edge. İncocontinue
knitting.
9th row: (dec)*12 (12)
10 row: 12 sc
Stuff the palm.
11 row: for p / pp (inc) * 12 (24)
12 row: 24 sc
Finish sl-st, cut the thread.
İnc and connect the blue thread to the beginning of the 11th row and knit for the remaining
s/pp. In the course of knitting, stuff the part.
13 row: (3 sc, inc) * 3 (15)
14-21 row: (8 rows) 15 sc
22 row: (3 sc, dec) * 3 (12)
23 row: 6 sl-st, 6 Hdc (12)
24 row: (1 sc, inc) * 6 (18)
25-32 row: (8 rows) 18 sc
33 row: (1 sc, dec) * 2, bring the inco-wire to the front side of the hand, (1
sc, dec)*4 (12)
34 row: (dec) * 6
Close the hole, cut the thread, sew the tail.
İncish hands to the body between the 5th and 6th rows of the body (count from
collar).
Tail
Consists of 6 identical parts, do not stuff the parts.
We knit with a red thread.
1 row: 2 ch., in the second loop
incoknit 6 sc (6)
2 row: 6 sc
3 row: (2 sc, inc) * 2 (8)
4-16 row: (13 rows) 8 sc
17 row: (2 sc, dec) * 2 (6)
Finish sl-st, cut the thread. On
do not cut the thread of the last detail,
inco continue knitting.
Compound:
1 row: 3 sc (on the 6th part), 3 sc (on the 5th part), 3 sc (on the 4th part), 3 sc
(on the 3rd part), 3 sc (on the 2nd part), 6 sc (on the 1st part), 3 sc (on the 2nd part
parts), 3 sc (for the 3rd part), 3 sc (for the 4th part), 3 sc (for the 5th part), 3
sc (on the 6th part) (36)
2 row: (4 sc, dec) * 6 (30)
3 row: (3 sc, dec) * 6 (24)
4th row: (dec)*12 (12)
5 row: (5 sc, 3 sc in one
buttonhole)*2 (16)
Finish sl-st, leave the thread for
Inc. tail base
hit a little.
İncish tail along the line
marker (in the middle of the back)
right under the shirt.
Ball
I tied a sc wooden bead with a diameter of 3 cm. Incicleated on top
black half decushins. Due to them, the ball is well kept as in the hands
cockerel, and on any smooth surface.
Decor:
1. Glue our cockerel’s eyes and eyelashes.
2. Link two chains of 14 ch. and inkleit (incish) on top of
eye contour. This will be our eyelids.
3. Embroider lacing on the boots.
4. İncishit number on the chest, you can embroider, tie, as your soul
you like , I have a wooden button-number incishita.
5. Give the ball to the cockerel.