‘Necessary materials
Materials are given for a bunny in overalls. Consumption İNCyazhi is given with a margin.
1. İNCyaja H | ta! aua s! o1pH | n bayu:
– main color-2 motMAGİC RİNG
– additional color for overalls -1 skein
-additional color on the blouse-floor motMAGİC RİNG
2. Hooks:
– for knitting the bunny itself 3.5 -4
– for knitting ears 6-7
3. Eyes and nose on a secure mount. Eyes with a diameter of 16mm,
4. False eyelashes
5. Filler
6. İNC thread in the tone of the main color for tightening the muzzle and İNC stitching details
7. Black or dark brown floss thread for
design
8. Glue moment “Crystal1′
9. Disks for fastening legs and head 40mm – 6pcs, T-shaped cotter pins
2.5 x 3.2 mm – Zpc
If you do not have fasteners, then you can İNC sew your head, and make your legs on a thread fastener or knit
11. Large needle for tightening
İNC and using the specified materials, the height of the finished toy is from 28 cm. It all depends on your knitting density and the selected knitting.
Conventions
MAGİC RİNG – amiyeurumi ring SC – single crochet DEC-DECavMAGİC RİNG İNC-İNCbars
ss-connecting bollard HDC-half bollard single crochet
(..} * – number of repetitions
3 vm – we knit ZSC together for the front half loops DECavMAGİC RİNGy
‘Legs
Marker İNC goes in the middle of the heel. We stuff in the course of knitting.
We stuff the foot tightly, in the area of disMAGİC RİNG it is completely sickMAGİC RİNG,
1. 7 İNC, from 2nd st from hookMAGİC RİNG, 5SC, 3 in 1, 4 SC, İNC – (14)
2. İNC, 4 SC,( İNC from HDC) *3, 4SC, 2 İNC -( 20)
3.1 SC, İNC, 4SC, (HDC, İNC from HDC) *3, 4 SC, (1SC, İNC)*2- (26)
4. 26 SC per charge
5-b.26SC
7.6SC, 7DEC, 6SC – (19)
8. 4SC, 2DEC, 3VM, 2DEC, 4SC – (13)
9-10.13 SC
11.2SC, İNC, 3SC, İNC, 3SC, İNC, 2SC – (16)
12.16 SC
13. (3 SC, İNC) *4 – (20)
14-17. 20SC
18. (3SC, DEC) *4 – (16)
We retreat 3 r down, insert a disk with a cotter pin, from the marker to the left and in İNCavo, respectively, along the bSC.
19. (2SC, DEC) *4 -(12)
20. BDEC
Tulki
We fill only the lower part up to the 8th row.
1. b c MAGİC RİNG
2. b İNC-(12)
3. (1 SC, İNC) *b-(18)
4-5. 18 sc
6. (1SC, DEC)’4, bSC -(14)
7. b€S, 8 SC-(14)
8.(1SC,DEC)*3.5SC-(11)
Changing the thread
9-18. 11SC
Fasten the thread, cut.
‘Tail
1.7 V MAGIC RING
2. 7 İNC-(14)
3. (1SC, İNC) *7-(21)
4-5. 21SC
6. (1SC, DEC) *7 – (14)
7.7 DEC.
Fasten the thread, cut.
tendrils
We knit HDC ears. The length of the MAGİC RİNG ears depends on your preference. All İNC and DEC are made from HDC.
1.7 HDC in MAGİC RİNG
2.7 İNC-(14)
3. (1HDC, İNC) *7 – (21)
4. (2 HDC, İNC) *7 – (28)
5 – 6.28 HDC
7. { DEC, 12 HDC) *2 – (26)
8.26HDC
9. (DEC, 11 HDC) *2-(24)
10.24 HDC
11. (DEC, 10 HDC) *2-(22)
12.22HDC
13. (DEC, 9 HDC) *2 – (20)
14.20 HDC
15. (DEC, 8 HDC)* 2-(18)
16.18 HDC
17. (DEC, 7 HDC)* 2-(16)
18.16 HDC
19. (DEC, 6 HDC)* 2-(14)
20.14 HDC
21.(DEC, 5 HDC)* 2-(12)
22.12 HDC
Fasten the thread, cut.
We stuff in the course of knitting.
1. 6 in MAGİC RİNG
2. b İNC (12)
3. (1SC, İNC)*6-(18)
4. (2SC, İNC)*b-(24)
5. (ЗSC, İNC) -(30)
6. (4SC, İNC)*b-(3b)
7. (5SCг İNC) *6 – (42)
8. (bSC, İNC)*b-(48)
9. (7SC, İNC)*b-(54)
10-14. 54 SC
In the 14th row we put a marker (this is the marker for the beginning of the row and the marker for the İNC of your leg). We count 24 SC (this is the butt) we put a marker for the left leg. We insert the legs in the 7th row at a distance of 3OSC along the tummy.
15. 30 SC, (2 SC, DEC)*b – (48)
16, 30 SC, (1 SC, DEC) *b – (42)
17-18. 42 sc
If you knit in a MAGİC RİNGx slider, then change the color to an additional one (color of the blouse)
If in a dress or naked, then 19 and 20 p we knit İNCosto at 42 SC.
Body
19.42 SC per s/st
20.42 SC.
21. (5SC, DEC) *b-(3b)
22. (4SC, DEC) *6 – (30)
In the next row we knit handles
23.5SC with handle, (3SC DEC) *2, 5 SC with handle, (3SC, DEC) *2 – (26)
24. b SC, DEC, YuSC, DEC, bSC – (24)
25. (2SC,DEC)*b-(18)
26. (1SC, DEC)*6-(12)
27. b Dec.
We insert a disk with a cotter pin in the 26th row.
T&lova
Marker İNC goes in the middle from the bottom of the head.
We stuff in the course of knitting
1.6 in MAGIC RING
2.6 İNC – (12)
3. (1SC, İNC)*b-(18)
4. (2SC, İNC)*6-(24)
5. (ЗSC, İNC) *6-(30)
6.30SC
7. 12 SC, b İNC, 12 SC -(36)
8.36SC
We insert the eyes on a secure mount between 7 and 8 side by side at a distance of dr from dr 5-6 SC. We glue the eyelashes in advance.
9.12 SC, (1SCg İNC) *b, 12 SC – (42)
10. (bSC, İNC)*6 -(48)
11. (7SC, İNC) + b – (54)
12-17. 54 SC
We insert the head into the body between 12-13 rows strictly in the center from the bottom.
18. (7SC, DEC) *b-(48)
19. (bSC, DEC) *b-(42)
21. (5SC, DEC) *6-(3b)
22. (4SC, DEC) *6 – (30)
23. (ЗSC, DEC) *6 – (24)
25. (2SC, DEC) *6- (18)
25. (1SC, DEC) *6-(12)
26.6 DEC
Decor
We take a long needle, an accurate thread to match our nut. On the muzzle we mark the maces MAGİC RİNG and points for tightening 1,2,3,4,5,b,7 and on the back of the head there will be a point MAG IC RING 8.
We retreat from MAGİC RİNG 5 rows down strictly one SC to the left of the center of the muzzle – this is t.1. We insert the needle in vt.1, output in v.2, retreat 2 SC, insert the needles in v.3 and output in v.1 We pull the thread. We repeat this step. Fasten the thread. Next, we retreat from v.1 in İNCavo 1 SC, insert it into v.4, output it to t 5, retreat 2 SC and insert the needle into t.b, return to v.4. We repeat again. Fasten the thread.
We insert the needle into the formed mouth and withdraw it to point 3, retreat 1 SC up the eye and bring it out from behind in the place where the disk is (point 3). We insert the needle into the same hole and bring it out one SC up from p.5. We insert it into v.5 and output it into the mouth. Thus, the eyes should “sink” a little. If necessary, repeat this step. Very carefully insert the needle at the back of the head, trying to get into the same hole.
We make a jumper between cheeksMAGİC RİNGmi. From t 8 we return to the mouth. From MAGİC RİNG we retreat upwards, strictly in the center of 2 rows (the thread over the canvas} insert the needle, we drive it back into the mouth, tighten it. Repeat again. Bring the thread out at the back of the head, fasten it, cut it off, put it into the product.
From the nose of the MAGİC RİNG we bite off the leg with pliers. I glue the nose. We embroider the eyebrows and, if desired, the eyelids and the jumper between the cheeksMAGİC RİNGmi.
İNC we sew ears. Maces MAGİC RİNG we fasten on the head. Finding the perfect location for you. I have a distance between ushMAGİC RİNG and 2SC. İNC we sew for both walls of the earsMAGİC RİNG.
BINDINGMAGİC RİNG PANTS.
We fasten the thread to the pantsMAGİC RİNGx. We collect the required number of air loops for the straps. On the back, we fasten the chain from İNC to the pants with a connecting post. We turn the knitting and return back along the chain from vl, alternating ZHDC, 2HDC. Having reached the beginning, we fix the thread with a connecting column, cut it, İNC into the product. Similarly
knit a second strap.
We knit the frill on the pants themselvesMAGİC RİNGx in the same way. We fasten the thread on the back and knit 3HDC, 3HDC alternately. Fasten the thread, cut
İNC into the product.
FLOWER
In MAGİC RİNG dial 5 İNC. İNC we continue knitting: 2İNC, in the same loop
knit 3 HDC. In the next loop we make ss, dial again
2 İNC and knit in the same loop ZHDC. And so on until the end .. Dial a chain of air loops equal to the volume of the bunny’s head. Connect in a circle. Fasten the thread, cut. İNC to make a flower.